im haveing a hard time giguring out what wires are
what on my stock ecu.Its a 1991 tbi 2bbl and im pining it to a holley dominator
ecu.my problem is i cant find a pinout for the stock harness so im
running blind.if anyone can help i would love to hear what you have to say.
thanx ,matt p
We are going to need the service number off your stock ECM.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
His other thread says 91 TBI with a 4L80E trans so it must be a 16147060 PCM.
http://www.gearhead-efi.com/Fuel-Inj...Information-85
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Ahh, I forgot his other thread.
Last edited by JeepsAndGuns; 12-04-2012 at 02:32 AM.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
Never mind
Last edited by phonedawgz; 12-04-2012 at 04:16 AM.
Posting Permissions
Reply With Quote
Bookmarks