TunerPro XDF for 0411 LS1 PCM Project!

[LRT]

....

[B52Bombardier1]

This is AWESOME and I have been searching for these Holy Grail files to edit and squirt into my recently acquired $18.50 junk yard pulled P59. I had a mismatched XDF that you recently pointed out that would not work with the oddball truck BIN I was using. The two files above now make much better sense inside Tuner Pro RT without the extremely weird table numbers and completely red tables in general. Really appreciate it.

The only thing I can't find so far is where to change the diameter of the rear tire??????

Rick

[LRT]

....

[peralesfive]

Hey LRT
you seem to know your way around Tuner Pro. do you know how to create folders in the Parameter Tree to organize the the XDF Parameters?

iv been making some decent progress, starting from the bottom. but once the files are defined will be easy to adjust them to what ever year.

[LRT]

....

[peralesfive]

Thanks was able to add them in.

Attached is what i worked on real quick. just enough to change DTC and VATS with a little Extra

still looking at what is important to add to the file but alot to go through.

[Escalado]

This is AWESOME and I have been searching for these Holy Grail files to edit and squirt into my recently acquired $18.50 junk yard pulled P59. I had a mismatched XDF that you recently pointed out that would not work with the oddball truck BIN I was using. The two files above now make much better sense inside Tuner Pro RT without the extremely weird table numbers and completely red tables in general. Really appreciate it.

The only thing I can't find so far is where to change the diameter of the rear tire??????

Rick

Hey you wouldn’t happen to have an adx file for the 12212156 OS running 2002 Silverado 1500 4x4 cal? I’m trying to log using OBDX pro gt, tunerpro RT, and pcm hammer