TunerPro XDF for 0411 LS1 PCM Project!

[tpichevelle]

Mark, thanks for the quick reply. Glad to see the enthusiasm.

So If we made the 411 flash chip socketable and read/write the OS and bin w an eprom burner, what are sources for a robust XDF/OS/ADX combo? Then, as the flashing capability becomes robust, it becomes more convenient to optimize.

Is there is anything I can do to help with either the files, flashing, or documentation for others? My TPI maf system works great because people made tunerpro and provided the files to compliment it. I was able to adapt it to my 72 Chevelle gen I 350.

Take care

[TuningMonkey]

Hey Mark,

I'm using the 2500S xdf file you posted here to tune a 0411 PCM with an LT1 an EFI connection conversion harness and reluctor. Everything has worked great except I can't seem to find where the tach resolution settings are stored. Is that exposed in your xdf? If not, is there any way I can help search for the high and low res tach settings? I'm sure this will help others who want to put the 0411 in an alternate vehicle since the tach output would need to be changed.

Thanks.

[EagleMark]

I'm not sure? First thing we have to clear up here is I'm not responsible for the work on these .XDF files! Read the first line of the first post!

These are really incredible XDF files for TunerPro by dimented24x7!

As to your question I'm not sure how to get that done?

[TuningMonkey]

Hey Mark,

My bad. The xdf is password protected, so I'll try to get in touch with demented24x7.

Thanks!

[RobertISaar]

the password protected versions are the early ones, IIRC. he later released non-locked versions.

[TuningMonkey]

Hey Robert,

Thanks. Do you happen to know where the later ones are located?

Thanks,

[RobertISaar]

the XDFs in Mark's first post seem to be the non-password versions.