'87 Camaro manual 5.7 -- bin to use?

[brianko]

Turns out I'm working with a $32B calibration not a $6E as posted in another thread. At any rate, I'm looking for a stock .bin file that will get me started in a '87 Camaro manual with a 5.7L. Didn't find one in the bin thread. Could I start with an '87 Corvette 6-speed calibration and go from there? Or can I take an '87 F-body auto bin and modify accordingly to run on a manual?

This vehicle has been running with a MEMCAL from a 5.0L...no wonder it runs like crap!

[brianko]

I ended up using the ABWN bin and just enabling the manual flag. Anything else need to be done?

[EagleMark]

Have you checked the ones here with BCC?

http://www.gearhead-efi.com/gearhead...%206E%2094/32/

[Dewayne_S]

What ECM are you running? If it's the '7165 I think you should be able to change to 6E. If I remember correctly my car was 32b then I first got it but after reading about 6e I swapped to that.

[brianko]

EagleMark: I don't have the original MEMCAL, so I don't know what the stock BCC is... Dewayne_S: Yes, it's a 7165. That sounds like an interesting option. I've got it running with the ABWN calibration, but if I run into trouble while tuning, I'll take a look at the $6E calibration.

[EagleMark]

ABWW is an auto to start. Lots of differences from auto to manual. IAC logic, TCC and Park Neutral...