newbie to tuning 95 lt1

[71-nova-lt1]

i have a 1995 lt1 out of a roadmaster. ive done the standalone harness mod to the harness. i need to know step by step and proglems used to do it. if some one can help me please. i wanna delete vats. trans control,egr. change rearend ratio<br><br>if some one can help me ill be think ful

[EagleMark]

That's a big first request? First you should read the TunerPro tutorial.
http://www.gearhead-efi.com/Fuel-Inj...is-a-must-read


Files for the LT1 are mask $EE, you'll need the XDF and ADX files here:
http://www.gearhead-efi.com/Fuel-Inj...rmation-EE-EEB

To read the bin file from your PCM you'll need TunerCat WinFlash and a cable from somewhere.

Load TunerPro RT and the XDF/ADX files, get a bin file and use it and click around TunerPro and get an idea what it can do, you'll see the Paremeters your looking for.

[71-nova-lt1]

Thank u!! Does that site have the files for the roadmaster lt1

[EagleMark]

Files are here in link above.

[71-nova-lt1]

How do u change the cam size on tuner pro

[EagleMark]

Cam size is not a calibration setting, if cam has changed then tuning needs to be done to Volumetric Efficeincy or MAF. You still running MAF or going SD (Speed Density)?

Did you see the Flags for VATS to disable? VATS Select (X = Enabled) and VATS Diagnostic, Error 46.

You'll need a cable of your choice and TunerCat Winflash to re-flash the PCM.
http://www.tunercat.com/winflash_des...lash_desc.html