Results 1 to 4 of 4

Thread: Flashhack and $eehack issues

  1. #1
    Carb and Points!
    Join Date
    Apr 2020
    Posts
    2

    Flashhack and $eehack issues

    First I should say I've used this software in the past with great success on dozens of cars utilizing a moates cable.

    Earlier this year I tried writing a car with my tuning laptop and it kept giving me a 'bus is silent could not load kernel" error. After chasing wiring in the car for a a day and everything checking out I decided to install flashhack on my other laptop and wouldn't you know, it worked. I tried reinstalling it on my tuning computer and still it would not work.

    Last year I used it on my newer laptop several times and had no issues....until last week. My new lap did the same thing my old one did with no response from tside, I tried communicating with multiple cars i have in the shop, no luck. Ordered a new cable from aldlcables using the ftdi drivers and still nothing.

    I deleted all drivers and com ports and flashhack and eehack, reinstalled everythjng and now when I click on them it acts like they're opening but they never actually do. Tried the same on my tuning laptop, they open but still "could not communicate with T side bus is silent. I've disabled any firewalls etc. I'm just at a loss here.


    Any input would be greatly appreciated!

  2. #2

  3. #3
    Carb and Points!
    Join Date
    Apr 2020
    Posts
    2
    Quote Originally Posted by steveo View Post
    and you're sure the correct com port is selected?
    Yes, verified several times. Also Uninstalled all coms and went to com 3 as my numbers were getting up there.

    When I click test interface it says both cables should be good to use. But neither will read or write. I have a feeling it's something the computer is doing with the hardware.

  4. #4
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,045
    it's weird for sure. i have like 1/100 users eventually report weird interface issues. maybe it's just a crap interface with a counterfeit chip dying or bad wiring in the car. i would consider doing one of my DIY interfaces and just trying it to see if that works instead. go on ebay, buy a FTDI TTL interface, hook the RX and TX wires together, and connect them to the data pin, and ground to the ground. instant 10 buck ALDL cable. i developed flashhack entirely with an interface like that. the wires were literally twisted together. it never failed.

Similar Threads

  1. Minor Flashhack Bug
    By NomakeWan in forum GM EFI Systems
    Replies: 17
    Last Post: 10-19-2022, 08:22 AM
  2. Flashhack Issue
    By Janson9027 in forum EFI Tune
    Replies: 12
    Last Post: 11-26-2021, 08:54 AM
  3. Flashhack EE continued
    By steveo in forum GM EFI Systems
    Replies: 37
    Last Post: 11-18-2021, 06:20 AM
  4. 1995 LT1 Flashing Issues EEHack
    By boxsport in forum GM EFI Systems
    Replies: 41
    Last Post: 04-09-2020, 07:55 AM
  5. eehack issues
    By firemechanic909 in forum GM EFI Systems
    Replies: 7
    Last Post: 09-09-2019, 02:35 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •