Hey I am pretty sure I am answering my question but wanted to double-check before I make any mistakes. I pulled my bin off with PCM hammer. Seems like it worked, but want to make sure I am using the proper XDF file for tuner pro. It shows my OS ID as 12212156, so I assume that is the XDF that I want to be using correct? I am just a tad confused bc my calibration id is showing something for a 2002 yukon, although this is a 2002 Camaro that never had its PCM changed.
The backstory, it's a stock car but when I had to replace the engine it was a stock LS1 besides a more aggressive cam, it needed a custom tune due to the car being automatic. So my goal is to keep everything the same except turn off a DTC code.
So basically its load up tuner pro, use the XDF for 12212156, and then edit the DTC, and flash the bin back, correct?
Any help is greatly appreciated. Below is the info that came off PCM hammer
03:04:13:213] PCM Hammer 020
[03:04:16:373] Thanks for using PCM Hammer.
[03:04:17:706] Voltage: 13.5V
[03:04:17:719] Elm ID: ELM327 v1.4b
[03:04:17:759] ScanTool device ID: STN1155 v5.6.19
[03:04:24:417] VIN: 2G1FP22G322157625
[03:04:24:474] OS ID: 12212156
[03:04:24:535] Calibration ID: 12206841
[03:04:24:584] Hardware ID: 9386530
[03:04:24:715] Serial Number: 2EB33YWP2130
[03:04:24:797] Broad Cast Code: DJZN
[03:04:24:859] MEC: 0
[03:05:09:623] Will save to C:\Users\Documents\camarofirstread.bin
[03:05:19:760] Querying operating system of current PCM.
[03:05:19:911] OSID: 12212156
[03:05:20:176] Unlock succeeded.
[03:05:20:332] This interface does not support VPW 4x
[03:05:20:433] Requesting permission to upload kernel.
[03:05:20:512] Upload permission granted.
[03:05:21:361] Kernel upload 9% complete.
[03:05:22:403] Kernel upload 22% complete.
[03:05:23:434] Kernel upload 35% complete.
[03:05:24:493] Kernel upload 48% complete.
[03:05:25:537] Kernel upload 61% complete.
[03:05:26:618] Kernel upload 74% complete.
[03:05:27:659] Kernel upload 87% complete.
[03:05:28:708] Kernel upload 100% complete.
[03:05:30:176] Kernel Version: 010303BB
[03:05:30:184] kernel uploaded to PCM succesfully. Requesting data...
[03:05:30:285] Flash chip: Intel 28F400B, 512kb
[03:15:53:195] Read complete.
[03:15:53:206] All read-request messages succeeded on the first try. You have an excellent connection to the PCM.
[03:15:53:217] We're not sure how much retrying is normal for a read operation on a 512kb PCM.
[03:15:53:230] Please help by sharing your results in the PCM Hammer thread at pcmhacking.net.
[03:15:53:242] Starting verification...
[03:15:53:290] Calculating CRCs from file.
[03:15:53:306] Initializing CRC algorithm on PCM, this will take a minute...
[03:15:53:505] Requesting CRCs from PCM.
[03:15:53:526] Range File CRC PCM CRC Verdict Purpose
[03:15:58:908] 060000-07FFFF A1E37653 A1E37653 Same OperatingSystem
[03:16:04:027] 040000-05FFFF 10EBBE30 10EBBE30 Same OperatingSystem
[03:16:09:082] 020000-03FFFF E0423C76 E0423C76 Same OperatingSystem
[03:16:13:193] 008000-01FFFF FFD36B68 FFD36B68 Same Calibration
[03:16:14:910] 006000-007FFF A597B1B7 A597B1B7 Same Parameter
[03:16:16:621] 004000-005FFF 85B5BB36 85B5BB36 Same Parameter
[03:16:18:567] 000000-003FFF 71589888 71589888 Same Boot
[03:16:18:651] The contents of the file match the contents of the PCM.
[03:16:18:823] Clearing trouble codes.
[03:16:21:007] Clearing trouble codes.
[03:16:23:111] Elapsed time 00:11:02.9189018
[03:16:23:135] Saving contents to C:\Users\Documents\camarofirstread.bin
Reply With Quote
Bookmarks