apu1 vs dynamic efi?

[tayto]

EBL comes with stock calibrations. It also is a GM ECU so adjustments are the same as any other GM ECU of that era. If you couldn't figure EBL out I doubt Emulation and burning your own chips will go any better. Also the creator Bob is very good at replying to emails and is still active on many forums lile thirdgen.org

[bhr]

EBL comes with stock calibrations. It also is a GM ECU so adjustments are the same as any other GM ECU of that era. If you couldn't figure EBL out I doubt Emulation and burning your own chips will go any better. Also the creator Bob is very good at replying to emails and is still active on many forums lile thirdgen.org

EBL only comes with the GM spark and VE tables from the included 4-5 "stock" calibrations it comes with, it uses a GM ecu but your tuning with its own mask. Its labeled 350 tpi auto will not drive like the original GM tune, there is a ton more of tuning info on the net for the old GM masks spanning the last 20 yrs from multiple posters there is only Bob for the EBL

[tayto]

lol ok

[PlayingWithTBI]

EBL only comes with the GM spark and VE tables from the included 4-5 "stock" calibrations it comes with, it uses a GM ecu but your tuning with its own mask. Its labeled 350 tpi auto will not drive like the original GM tune, there is a ton more of tuning info on the net for the old GM masks spanning the last 20 yrs from multiple posters there is only Bob for the EBL

FYI - the EBL uses the .xdf files, in TunerPro RT, other GM cars/trucks use. The EBL does have its own form of an .adx - it's the What's Up Display. That's used for data logging but, Tuner Pro RT will modify the .bin

Here's a thread dedicated exclusively to the EBL for your reading enjoyment...

https://www.thirdgen.org/forums/diy-...ispreloading=1

[stackz]

I came across a deal I could not refuse and did a thing.

no clue what to do with the usb harness but I'm sure I will find out on the cd lol. I assume this is the usb data port and that it plugs into otherwise unused ecu connector terminals?

this should be fun!

20240406_203042.jpg

[PlayingWithTBI]

I came across a deal I could not refuse and did a thing.

no clue what to do with the usb harness but I'm sure I will find out on the cd lol. I assume this is the usb data port and that it plugs into otherwise unused ecu connector terminals?

this should be fun!

20240406_203042.jpg

Maybe this will help...
http://dynamicefi.com/EBL_Flash_Install.php