I can pull from PCM, Make adjustments, and do a test write with PCM Hammer but I get am error message when I try to write parameters.
This is what error popped up. Any help is appreciated!
[10:16:47:185] PCM Hammer 021
[10:16:47:200] Friday, October 13 2023 @10:16:47:20
[10:16:47:200] ElmDevice initialization starting.
[10:16:47:513] TX:
[10:16:47:856] Loaded start.txt from network.
[10:16:47:856] Thanks for using PCM Hammer.
[10:16:47:856] TX: AT Z
[10:16:48:700] AT Z ELM327 v1.4b
[10:16:48:700] TX: AT E0
[10:16:48:716] AT E0 OK
[10:16:48:716] TX: AT S0
[10:16:48:716] OK
[10:16:48:731] TX: AT RV
[10:16:48:747] Voltage: 12.1V
[10:16:48:747] TX: AT I
[10:16:48:778] Elm ID: ELM327 v1.4b
[10:16:48:778] Initializing PcmHacking.AllProDeviceImplementation
[10:16:48:778] TX: AT #1
[10:16:48:778] This is not an AllPro device.
[10:16:48:794] Determining whether PcmHacking.ScanToolDeviceImplementation is connected.
[10:16:48:794] TX: ST I
[10:16:48:809] ScanTool device ID: STN1130 v5.6.19
[10:16:48:809] TX: STPTO 3000
[10:16:48:825] OK
[10:16:48:825] TX: AT AL
[10:16:48:841] OK
[10:16:48:841] TX: AT SP2
[10:16:48:856] OK
[10:16:48:856] TX: AT DP
[10:16:48:872] SAE J1850 VPW
[10:16:48:872] TX: AT AR
[10:16:48:888] OK
[10:16:48:888] TX: AT AT0
[10:16:48:903] OK
[10:16:48:903] TX: AT SR F0
[10:16:48:919] OK
[10:16:48:919] TX: AT H1
[10:16:48:935] OK
[10:16:48:935] TX: AT ST 20
[10:16:48:950] OK
[10:16:49:122] Loaded credits.html from network.
[10:16:50:013] Loaded help.html from network.
[10:17:02:103] Setting timeout for ReadProperty, 25 ms.
[10:17:02:119] TX: STPTO 25
[10:17:02:134] OK
[10:17:02:181] TX: STPX H:6C10F0, R:1, D:3C01
[10:17:02:403] RX: 6C F0 10 7C 01 00 31 47 54 47 43
[10:17:02:403] TX: STPX H:6C10F0, R:1, D:3C02
[10:17:02:449] RX: 6C F0 10 7C 02 32 39 55 34 59 45
[10:17:02:449] TX: STPX H:6C10F0, R:1, D:3C03
[10:17:02:496] RX: 6C F0 10 7C 03 33 32 31 36 37 34
[10:17:02:496] VIN: 1GTGC29U4YE321674
[10:17:02:543] TX: STPX H:6C10F0, R:1, D:3C0A
[10:17:02:590] RX: 6C F0 10 7C 0A 00 BA 3E 2C
[10:17:02:590] OS ID: 12205612
[10:17:02:606] Hardware Type: P01_P59
[10:17:02:606] TX: STPX H:6C10F0, R:1, D:3C08
[10:17:02:653] RX: 6C F0 10 7C 08 00 8F 1E DF
[10:17:02:653] Calibration ID: 9379551
[10:17:02:653] TX: STPX H:6C10F0, R:1, D:3C04
[10:17:02:699] RX: 6C F0 10 7C 04 00 F7 81 C2
[10:17:02:699] Hardware ID: 16220610
[10:17:02:715] TX: STPX H:6C10F0, R:1, D:3C05
[10:17:02:746] RX: 6C F0 10 7C 05 31 44 47 30
[10:17:02:746] TX: STPX H:6C10F0, R:1, D:3C06
[10:17:02:778] RX: 6C F0 10 7C 06 58 4C 43 36
[10:17:02:778] TX: STPX H:6C10F0, R:1, D:3C07
[10:17:02:856] RX: 6C F0 10 7C 07 30 30 33 33
[10:17:02:934] Serial Number: 1DG0XLC60033
[10:17:02:965] TX: STPX H:6C10F0, R:1, D:3C14
[10:17:02:996] RX: 6C F0 10 7C 14 43 59 43 42
[10:17:02:996] Broad Cast Code: CYCB
[10:17:03:028] TX: STPX H:6C10F0, R:1, D:3CA0