Hey everyone.

The stock Quad-4 coils r getting hard to find so thought I would try a couple 3.8l coils. I hooked em up and they work but the idle is high 1200rpm and its pulling the idle timing down from 17 to 10. it has a code35 Idle Improper but was already there and the light is normally off with the red dot by code 35 in the list. now the CES light is mostly on. Is there anything I can change to get these coils to work like latency in $0D? Or maybe they are not compatible with the 8707 ecm? Seems like the timing is high across the rpm range.

Any suggestions would b greatly appreciated