In the Cobra emulator instructions it shows that sensors can be added to the emulator on a analog port. It shows the wire for a map sensor going to the emulator and the ecm. My car does not have a map sensor, I would like to add a 3bar sensor for a supercharger. Can I just add it to the emulator on one of the analog pins? I would like a map sensor reading for fueling under boost.
As I understand the purpose of the additional inputs, they are for logging reference only and will not modify the actual function of the ECU/BIN/Tune file loaded to the Cobra RTP. It also sounds like the additional inputs may only work with a stand alone datalogging software and may not be able to bring that info into an existing XDF.
It would be interesting if there was a way to have sensors directly connected to an emulator to be used within the BIN file on the emulator.
The man who says something is impossible, is usually interrupted by the man doing it.
Posting Permissions
Reply With Quote
Bookmarks