I could have brought up that the ARAR bin from the forum did not look right in other areas. But I assumed it was your bin from somewhere else and my mind is taking in so much. It is like filling a shot glass with a pitcher of beer.

I did try changing the Max spark from 42 to 38 and the injector size from 22.?? to 19.?? and it still shows lean on the AFR gauge. But at least I am learning something! I just hope it sticks.

I also changed the bin stacker to 16, 64 and 64 and noticed it was already pos 0.

When looking in Parameter Category, under "Fuel" it shows Start up enrichment and multiple MAF tables.
Is that has a richer or leaner AFR is achieved? By adjusting MAF tables?