Quote Originally Posted by MadMikeZ28 View Post
The last bin you attached, ARAP, fans still on and no start.
That is incredibly peculiar. If it were my car, the next thing I'd do is check error codes. If it's throwing an ECM PROM Fault error code then I know something's super wrong with the BIN and/or chip and can stop diagnostics there.

If it's not throwing that code, next thing I'd do is isolate all devices connected to the D11 pin to make sure nothing external is commanding the fans to turn on. If that didn't resolve the fan issue, I'd then check the ALDL datastream to see if the ECM is indeed commanding the fan or not (if it is not commanding the fan and the fan is coming on anyway, then either the XDF has the setting inverted, or there's a short-circuit across the fan relay).