CobraRP Motronic RT R6 emulator

[dana0330]

I have a 1986 Camaro with a 2.8l and a 1227302 ECM. I added a small supercharger to it, and I got a burner, chips, and a Cobra RTP from BoostedNW. My question is should I just burn a new chip for it? Or should i use the emulator? How do I use the emulator?

Thanks Dana

[jlowens76]

You just Connect the emulator then open TunerPro RT, Load your bin and xdf, and then click "Initialize emulation hardware" then you can click "Upload current bin to emulator"

If you want to then enable live tuning, You go ahead and click "Enable/Disable Live Tuning"

[dana0330]

Thanks for the information. I have been looking for a bin but can't find one for my combination. Where is the best place to find one?

Thanks Dana

[dave w]

I have a 1986 Camaro with a 2.8l and a 1227302 ECM. I added a small supercharger to it, and I got a burner, chips, and a Cobra RTP from BoostedNW. My question is should I just burn a new chip for it? Or should i use the emulator? How do I use the emulator?

Thanks Dana

Gearhead-efi link for 1227302 information, including .bin files: http://www.gearhead-efi.com/Fuel-Inj...Information-3A

[dana0330]

Thanks I looked at those bins I did not see a F-car with a 5 speed they look like all auto transmissions.

[dana0330]

Should I copy my original bin file from the original chip and load that into the emulator? Or should I load a premade bin?