Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 3 of 3

Thread: Tunerpro TPS reading

  1. #1
    Fuel Injected!
    Join Date
    Feb 2012
    Age
    56
    Posts
    43

    Tunerpro TPS reading

    Using $42 on a 7747 ECM I have noticed that my TPS is reported in tunerpro as .52 but also as 25%, I can twist it down as far as .3 and tunerpro reports that as 11%. Flooring the gas pedal will put the reading way over 100%. I thought perhaps the TPS itself was bad so I replaced it with another one and have the same results. How do I fix this?
    Thanks
    Roy

  2. #2
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    57
    Posts
    10,477
    TPS reading percent in this mask is not in the data stream, what you are seeing is a calculation from voltage in the ADX file. Just a guidline, not accurtate. There is a hack in the XDF if you need TPS % look at the *Read Me!*

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Fuel Injected!
    Join Date
    Feb 2012
    Age
    56
    Posts
    43
    Thanks Mark

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •