Results 1 to 3 of 3

Thread: Tunerpro TPS reading

  1. #1
    Fuel Injected!
    Join Date
    Feb 2012
    Age
    63
    Posts
    96

    Tunerpro TPS reading

    Using $42 on a 7747 ECM I have noticed that my TPS is reported in tunerpro as .52 but also as 25%, I can twist it down as far as .3 and tunerpro reports that as 11%. Flooring the gas pedal will put the reading way over 100%. I thought perhaps the TPS itself was bad so I replaced it with another one and have the same results. How do I fix this?
    Thanks
    Roy

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    TPS reading percent in this mask is not in the data stream, what you are seeing is a calculation from voltage in the ADX file. Just a guidline, not accurtate. There is a hack in the XDF if you need TPS % look at the *Read Me!*

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Fuel Injected!
    Join Date
    Feb 2012
    Age
    63
    Posts
    96
    Thanks Mark

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •