new to tunnerpro need some help

[MGB]

just saw it say I should post here.



TunnerPro RT help LX9 3.5L V6 OBD1

Help connecting with tunner Pro
I have 60 deg 5.5 L V6 LX9 in a MGB with a 5 spd stick, I think it is about a 2005 maybe Malibu
1227730 ECU OBD1.

I want to see how it is tuned and change settings.
looks like I need some files but don't know what to use can these be downloaded from the ECU?

I was able to connect with a ALDL box from 1320Electronics with the phone
and did get a ADX file for Tunerpro RT

but is still need a Bin an ADX file? What should I choose.
the car has 6 Fuel injectors under the intake.

A140

LH0 91-94, SEE A140

8192 BAUD, PIN M

USE A140 To connect on phone.

not sure what bin file.xdf or data stream .ads to use. Thanks Mike

Mask ID

ECM

Bin Definition

Datastream Definition

Application

88

1227730 16197128

88.xdf

88.ads

90-92 F Body V6 (LH0) 90-94 Cavalier/Sunbird V6 (LH0) (ADS by Robert Saar

$6D

1227727 1227730

6D.xdf

6D.ads

87-89 Buick/Pontiac 2.8L and 3.1L MPFI vehicles

Attached Thumbnails

[NomakeWan]

If you got it to connect on your phone you're done with the connection part.

If you have an ADX, that's the file that allows TunerPro RT (and probably ALDLDroid) to connect. So again, if you have that, you're done.

ADS is the older format that became ADX. It's no longer used, so ignore it.

XDF is the definition to allow TunerPro to open a BIN file. It has nothing to do with connecting to the vehicle; it's only used to modify the BIN.