99 F-Body --> need XDF

[Bill87068]

Hello,

Newbie here, first post. Working on a 99 TA with a built NA LS1 motor. Looking for the XDF file for the GM OSID: 9360361

I did some searching and found one and it kind of seems to work but has several different modules for each of the main functions. Does anyone have a single XDF file for that??? If its even possible...

Thanks
Bill

[bobcratchet555]

if the motor has aftermarket heads, cam, etc, then you may as well update to the 2002 OS which has much better support. not really any good reason for you to stick with the 99 OS. just grab a bin, auto here - http://www.gearhead-efi.com/Fuel-Inj...ll=1#post88530 or manual here - http://www.gearhead-efi.com/Fuel-Inj...ll=1#post85839

[Bill87068]

Hmmmm thanks I will have to look into that. Only hesitation is the car was Dyno tuned a few years back when the motor was built but I have been thinking of swapping the LS6 intake for a FAST intake and TB so that might be the time to swap it over and start over.

Also it does run good but I have not had a chance to drive it and data log it so no idea yet how good the existing tune is. Guess I probably got to figure out how to add a wide band into the mix as well.

One thought if I swapped to the 02 OS I should be able to copy my VE tables and stuff over to that file and essentially have the same tune right?