Hello. New to EFI glad to be here. Like the picture on this page hop to be there soon and hope you have a good spell checker.
Anyways I love building Hot Rods Cars or Bikes and this looks like a good place to move from Carbs to EFI.
To all the Vets. Thanks for your services.
OK.. Later. PS. Thanks for letting me in.
What kind of EFI system are you thinking about?
Hey Dave. Thanks. Love FL use to live there. I need to back up and give you some History on me. Ill try not to bore you and get to far in the weeds. I grew in the 50s and 60s the Carb years and that's how I build my engines and that's the tuning I learned so I don't know the EFI systems but I know they can be tuned using software.Times have changed and I need to catch up. If I ran across A Harley Engine or a Cage Engine ( Car / Truck ) That was EFI I would turn it back to Carb. Basically I want to be a EFI tuner. I'm building a tuning bench and learning the software and terminology so I can ask questions that make sense. Any help with a bench setup ( Software, Cables, ect. would be a great help OBD2 ) Ill be doing Chevy Small Blocks. Like I said I love building Hot Rods Bikes or Cages and I'm willing to put the time in it to learn.
Thanks..........
The gearhead-efi OBD2 section has information for Software, Cables, ect. : http://www.gearhead-efi.com/Fuel-Inj...2-OBDII-Tuning
The "Sticky" Threads are very helpful.
PCM Hammer is a tool that can Read / Write to some OBD2 EFI computers: https://www.youtube.com/watch?v=Y4TybWavYW4
Posting Permissions
Reply With Quote
Bookmarks