Hi everyone. I have a 95 S10 with a 4L60E, a seized W code 4.3 V6, and computer number 16193495. I have a 350TBI from a 92 G20 Van I am swapping into the truck with computer 16146299. I am trying to figure out the best way to get one of these computers to control the engine and transmission together. I have been browsing the forums and learning about burning custom PROMs and, seen all the .bin files, etc. A couple of questions.

1.) Can I burn an EEPROM with a program from a full size truck that had a 350TBI & 4L60E and install it on the computer in the truck (no. 16193495) and merge the wiring harnesses using pinouts from both motors?
2.) Can I grab a computer & wiring harness from a full size pickup that had a 350TBI & 4L60E (let's say from a 1996 just as an example) and run the 92 motor and the 95 transmission?

Basically, I am trying to get one computer to control the 92 motor and the 95 transmission as cheap and painless as possible.

Thanks!