Results 1 to 2 of 2

Thread: 4L60E stays in 4th when warm

  1. #1
    Fuel Injected! MO LS Noobie's Avatar
    Join Date
    Apr 2022
    Location
    Missouri Ozarks
    Posts
    224

    4L60E stays in 4th when warm

    I have a 99 Tahoe 5.7 Vortec with a 4L60E that I transplanted a 6.0 LS LQ9. I have the tune fairly squared away except when fully warmed up, driving down the highway in overdrive, torque converter locked up. When I slow to a stop the transmission stays in 4th. Torque converter clutch unlocks properly but it has no torque until I manually shift into third, or any lower gear it immediately shifts to first and accelerates properly. The transmission then works properly till I'm on hiway for 10 minutes or more. Always works properly around town.

    I have installed the PCM in another vehicle and it does the same thing. I'm running a 462 PCM to allow air-conditioning operation and 603 operating system, the BIN file is attached below

    Any help/suggestions appreciated.
    Attached Files Attached Files

  2. #2
    Fuel Injected! MO LS Noobie's Avatar
    Join Date
    Apr 2022
    Location
    Missouri Ozarks
    Posts
    224
    Never found the issue, went back to original tune and started over. All is well.

Similar Threads

  1. Replies: 5
    Last Post: 08-08-2015, 10:46 PM
  2. cold start and warm up is terrible.
    By Scorp1us in forum GM EFI Systems
    Replies: 4
    Last Post: 11-29-2014, 02:35 AM
  3. $42, ASDU, SA - PE Spark Added and Warm Bias?
    By shimniok in forum GM EFI Systems
    Replies: 4
    Last Post: 05-01-2013, 01:19 AM
  4. Idle gets worse when warm, and has hot start issues
    By fallflight in forum GM EFI Systems
    Replies: 4
    Last Post: 06-14-2012, 01:52 AM
  5. Warm spark bias
    By TheApocalyptican in forum GM EFI Systems
    Replies: 15
    Last Post: 06-05-2012, 11:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •