Results 1 to 5 of 5

Thread: New Guy

  1. #1
    Carb and Points!
    Join Date
    Mar 2023
    Posts
    3

    New Guy

    Hi All, I recently retired and picked up a 94 K1500, 5.7, 4l60e to tinker with. Had a 88 C1500 I drove for 23 years with 327K miles on it when I got rid of it. My aunt worked for GM. Got to fly up to Michigan pick it up, and go through the plant where it was built, then drove it home. Should have kept it!

    Found this site looking for info to get my OBD Diagnostics ALDL connector working. Haven't got it figured out yet, but working on pulling files together to get WinALDL or TunerPro RT working. My ECM is a 16196395 BJLF.

    Looks like a fantastic site!

    Thanks!

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268

    WinALDL will not work with the 16196395.

    TunerPro RT files for the 16196395 are located here: http://www.gearhead-efi.com/Fuel-Inj...Information-OE

  3. #3
    Carb and Points!
    Join Date
    Mar 2023
    Posts
    3
    Thank you very much! That helps!

  4. #4
    Fuel Injected! ralmo94's Avatar
    Join Date
    Feb 2020
    Posts
    772
    It should be noted that while the 6395 page showed $0E, some did come from the factory with $0D, as did my 94. Op stated he has a 4l60, so he should be looking at $0d not $0E

    http://www.gearhead-efi.com/Fuel-Inj...Information-0D

    Here is the link to $0d, where you will find the stock bin for the bcc code BJLF along with the $0d definition files, adx and xdf
    No need to re-invent the wheel. But we can make it better

  5. #5
    Carb and Points!
    Join Date
    Mar 2023
    Posts
    3
    I will give that a try. Thank you!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •