Attached are pics of my TPI bin that i am working on...
It's a EBL P4 computer, but the specific tables i am asking of are of the factory types so i hope i am in the right place..
If you notice in the pics, the "INT" MEAN R/L settings have a lean, rich, and median number.... The median is always exactly between the rich/lean numbers. But the idle setting of this is not.. Why?!?
You can see when i compare to a factory setting, the mean r/l for INT at idle is the rich side, shouldn't it be in between like i have it on the right side?
Also, why is there a need to run richer and warm the engine up quicker?
Why would it be a bad ideal to go for a 14.7X:1 AFR from start up seeing as how this is a special occasion street machine that is only used on warm days in a warm climate S.E U.S KENTUCKY.
The reason i am making this is i found these while looking for a possible awnser to a slight issue she is having during "TIP IN" right when the gas first gets touched.. Give it more and it pulls right out fine, barley touch it sometimes in D/R and it tries to die out.... Any help appreciated!!
T.I.A
Bookmarks