Results 1 to 5 of 5

Thread: Another fng!

  1. #1
    Carb and Points!
    Join Date
    Mar 2023
    Posts
    3

    Another fng!

    Hello,
    Finally decided to do something with all these parts I have laying around. So far I have made a bench harness and it actually worked with my OBDXPro and Pcm Hammer.
    Currently trying to find a XDF file with will work with my os (12597120) but looking like i will need to swap the OS as its not common it seems. its a 06 3500 van with a 4.8 and a 4l80e. Fortunately im not breaking any new ground with this combo!
    Thanks for the add!

  2. #2
    Fuel Injected! ralmo94's Avatar
    Join Date
    Feb 2020
    Posts
    769
    Welcome.
    You could give universal patcher a try, it does not require an XDF, and it will create one for you also.
    No need to re-invent the wheel. But we can make it better

  3. #3
    Carb and Points!
    Join Date
    Mar 2023
    Posts
    3
    Trying it, but no luck yet. I have another one i can try.

  4. #4
    Fuel Injected! ralmo94's Avatar
    Join Date
    Feb 2020
    Posts
    769
    Quote Originally Posted by Joelker View Post
    Trying it, but no luck yet. I have another one i can try.
    Did universal patcher not find tables, or what happened?
    No need to re-invent the wheel. But we can make it better

  5. #5
    Carb and Points!
    Join Date
    Mar 2023
    Posts
    3
    Quote Originally Posted by ralmo94 View Post
    Did universal patcher not find tables, or what happened?
    Yeah, it was saying that it couldnt find the DTC table. Rebooted everything and it worked then! WooHoo!
    Thanks!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •