Results 1 to 3 of 3

Thread: aeromotive regulator and tbi block off plate

  1. #1
    Fuel Injected! one92rs's Avatar
    Join Date
    Apr 2011
    Posts
    173

    aeromotive regulator and tbi block off plate

    i have an aeromotive 13301 regulator less than a year old with the 20 psi spring and the 65 psi spring. i also am leaving the fittings in as well including the gauge port fitting. i am throwing in the four brass fittings to. the block off plate is for the tbi to block that regulator off when using this regulator. 100.00 shipped lower 48



  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I think I see a vacuum reference port for the regulator? I'm interested in a 20 PSI spring system, if it can be set up for vacuum referenced TBI system I'm working on. Any ideas what the fuel pressures vary with vacuum applied?

    dave w

  3. #3
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    I'll step in line for the regulator.
    The man who says something is impossible, is usually interrupted by the man doing it.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •