Missing log data for VE in 90 and 100 cells on a 7060 $85. Why?
Missing log data for VE in 90 and 100 cells on a 7060 $85. Why?
have you actually floored it? at wide open throttle your VE table should be near atmospheric pressure whatever that is. sea level is 'bout 100kpa and 1000m is 'bout 90kpa. if those numbers don't line up either your map sensor has an issue or you have a severe intake restriction causing vacuum at WOT
5280 Above Sea Level, Denver Area
Makes sense steveo, Thanks. So when adjusting those higher levels just use the smoothing tool?
yep pretty much, or take a trip down the mountain and fill those cells in
and google says "The atmospheric pressure in Denver, Colorado, is usually about 84.0 kPa."
so without a turbo, thats as much pressure as your engine will see - the air is thin.
Thought so, yea I've been doing the best I can by keeping the 90 and 100 cells as rich as I can without conflicting with the 70 and 80 cells. I'm getting there. Thanks again for the info!
Posting Permissions
Reply With Quote
Bookmarks