I have a OS that there aren't many xdf files for so I was going to swap to a 12587603 OS because I read they are plentiful on this site. I cannot find any. Does anyone have a link to one.
I'll have to segment swap to a non electric auto I get that I just can't find the bin.
Asking for help, please.
6.0, DBC. non E auto.
TIA
Jesse
Download and install tuner pro rt.
Then go to their files section online. The .xdf is there, or at least it used to be.
As far as the 7603 OS; go to the search bar above and top in7603.
Find the page where Eagle Mark uploaded them ma y years ago.
PersingC also has a very good 7603 .Bin thread. His is probably the most extensive I ha e used.
Jack of all trades, absolutely master of none! Too many projects, not enough time and limited funds.
Geronimo, Guadalupe County, Texas
1993 K1500 Suburban - SBC Refit retraining the TBI and Computer Control.
2004 Z66 Avalanche 5;3 to 6.0 LQ9 upgrade - project pending
I'm attaching a file that started as a combination of a 2004 5.3 truck with manual transmission and a 2004 4.8 Express van with DBC. I swapped the engine calibration and engine diagnostics segments from the van to the truck file, then I updated the cylinder volume, VE table and MAF table from a 6.0 truck LQ4 file to the hybrid file. The result "should" be a 6.0 DBC file with manual transmission. This should allow you to run your 6.0 DBC with non-electronic transmission.
I'm also attaching the latest 7603 XDF file. Just make sure to copy the *.dll file to your Tunerpro "Plugins" folder so that the checksums get calculated correctly.
Good luck and let us know how you project turns out.
Posting Permissions
Reply With Quote
Bookmarks