Anyone ever run into the knock counts stuck at 255 all the time with the key on engine on or off?
I have knock feedback disabled because of this, have tried 2 different knock sensors, triple checked wiring from the knock sensor to the PCM 0.2 ohms of the wiring and the sensor ohms out good as well?
The PCM im using is the 16197427 with $OE mask.
I've been told the memcal could be bad?
The memcal is from a 5.7L truck and my truck is a 7.4L motor but has been retuned with TunerPRO and is using the Moates Ostrich 2.0.
help...
Bookmarks