Results 1 to 2 of 2

Thread: weather pack dissasembly tool

  1. #1
    Carb and Points!
    Join Date
    Oct 2022

    weather pack dissasembly tool

    Does anyone happed to have the dissasembly tool and a pair of calipers handy to measure the diameter of the hole in the end?
    i'm going to turn one on my lathe and couldn't find the diameter of the hole anywhere on line.

  2. #2
    Fuel Injected!
    Join Date
    Jan 2017
    I don’t own the tool but after one of my kids broke the antenna off one of his remote control car controller, one of the sections is a perfect fit. I’m out and about but could take some measurements off of that.

    Edit: Mic'd it at .135" OD and for the inside, I was able to insert a 1/8" drill bit into it and that mic'd out to .122". I do have some disassembled weather pack connectors and mic'd the male connector loosely @ ~.120"
    Last edited by stew86MCSS396; 10-24-2022 at 08:11 AM.

Similar Threads

  1. 8051 weather sealing
    By JD1964 in forum GM EFI Systems
    Replies: 3
    Last Post: 07-04-2022, 02:49 AM
  2. LSx Coil Pack Relocation
    By dave w in forum OBDII Tuning
    Replies: 3
    Last Post: 04-16-2018, 09:20 PM
  3. weather pack dissasembly tool
    By dirtyjim in forum Gear Heads
    Replies: 7
    Last Post: 08-22-2013, 03:37 AM
  4. 1998 Vortec Dissasembly
    By EagleMark in forum TunerPro OBDII
    Replies: 5
    Last Post: 04-28-2013, 02:44 AM
  5. New guy with a 6 pack...
    By Superdave in forum Introductions
    Replies: 13
    Last Post: 04-18-2011, 09:10 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts