Need compatible cable or device for TunerPro

[Dukenukemx]

I'm trying to log my 02 Vette and nothing I have seems to like TunerPro. This cable I bought from Amazon will read and write with PCM Hammer, but not with PCM Logger and won't work with TunerPro. I do have a bluetooth ODB2 reader that seems to be detected but I can't get it to start logging. Don't know if I need a ADX file to be able to do this? If anyone has a ADS or ADX file that I can use to log please share it. Also, if anyone can point me to a cable or bluetooth device that does work with TunerPro, please tell me. I prefer the as cheap as possible option.

[ralmo94]

To log with tunerpro you need the definition file. There are some devices that can log to your smart phone on Amazon, most use a csv file to export. You can open that with a spreadsheet program or load it into trimalyzer for analysis. I'm not sure but as far as I know you have to have an adx for the device and data stream specific.

[Dukenukemx]

To log with tunerpro you need the definition file. There are some devices that can log to your smart phone on Amazon, most use a csv file to export. You can open that with a spreadsheet program or load it into trimalyzer for analysis. I'm not sure but as far as I know you have to have an adx for the device and data stream specific.

I have Torque for my Android phone, but can I make use of it's logging? Where can I find a adx file for my device? What devices on Amazon?

[ralmo94]

I have never used the toque app personally, but what options does it give you for saving a log? CSV? If so, you can load a CSV to trimalyzer

ADX.... I'm sure of any that exist, I'm sure someone has one somewhere, but I haven't seen one posted for download.

I seem to remember a generic ls1 obd2 for ELM devices posted somewhere.

[ralmo94]

I found a quick video on youtube showing how to get a csv log from the torque app
https://www.youtube.com/watch?v=72gwofW_Qi4

[ralmo94]

Here is a video I made that shows how to use trimalyzer, I made the video for tbi tuning, but if you skip to about 4:10 in it shows how to use trimalyzer, and the visual feedback it provides for a CSV log, and how you can paste modifications in tuner pro from it. paste modifications don't work for MAF tuning, but you can see the percent off it is, if it needs changed. Make sure and log in speed density mode if you want to tune VE. The filters you choose to set will depend on what is in the data log.

[Dukenukemx]

I have never used the toque app personally, but what options does it give you for saving a log? CSV? If so, you can load a CSV to trimalyzer

ADX.... I'm sure of any that exist, I'm sure someone has one somewhere, but I haven't seen one posted for download.

I seem to remember a generic ls1 obd2 for ELM devices posted somewhere.

I believe it can save it as a csv file. What should I log that's useful for tuning my LS1 Vette.

[ralmo94]

Fuel trims engine temp rpm vehicle speed map throttle kr closed loop status PE mode or desired afr, MAF hz if tuning MAF, pretty much anything supported. If you don't log it, you can't use it to filter data. Goal should be trims between 0 and -5.