data logging trips ses

[85Z28NOS]

I am using a 32b on a 165 and every time I plug into my aldl to record some data using tuner pro and moates extreme aldl usb connector it sends my car into ses and my blm lock at 128. I can actually look at my dashboard on TP and see the airflow change and the temp change and can even record the data but the o2 wont change. What dont I have set up right? I can plug into it with my snap-on modus after resetting the computer and read everything without any trouble

[dave w]

I am using a 32b on a 165 and every time I plug into my aldl to record some data using tuner pro and moates extreme aldl usb connector it sends my car into ses and my blm lock at 128. I can actually look at my dashboard on TP and see the airflow change and the temp change and can even record the data but the o2 wont change. What dont I have set up right? I can plug into it with my snap-on modus after resetting the computer and read everything without any trouble

In the 32B .xdf I have, I can't find Mask ID, but I think maybe the Mask ID needs to be set to AA?

dave w

[EagleMark]

The mask ID only needs to be AA for Emulation.

It sounds like you have the 10K jumper (on cable or box) on putting ECM in ALDL Mode? Does that ECM need the 10K to start data, then off? I know one of the 165 ECM does.

[85Z28NOS]

I purchased this from Moates and it said to have the selector on the box set to the 10k. So I should try switching it to open once it starts communicating. I will try this later today

[EagleMark]

Yeah but instructions on AutoProm says 10K is needed for 160 Baud systems, and it's not! But I think it's $6E that needs 10K to start, then off. Try it and let us know.

[85Z28NOS]

Your right about the $6e needing to have the 10k turned on then turned back off in order to start coms. Tried it out today, but my blm still stuck on 128. Need more time looking at setting to figure out why. Havent got to try the 32b out again yet. Will due this later tonight or saturday.