What files are mandatory to connect to ECM?

[camaro1995]

Hy,
I`m new with Tuner Pro RT... As far as I know this is the only software that will connect to my 91 3.1 v6 rs camaro (1227730 ECM).

I cannot get my car to connect with Tuner Pro... Cable test returns found and functional, I can also see data coming in with FreeScan software (but it doesn`t support my car).
I get "Not emulating", "Hardware not found" and "DA: Not connected" messages at the bottom of the program.

I had read alot of tutorials but I can`t find info on what files are mandatory for ecu to connect.

bin, xdf, ads or adx?

I`m using $88 files wich should be correct.

I just need this thing to connect before moving on.

Thank you

[ralmo94]

Adx is the data stream definition file you need. Also be sure you have the correct port selected on tunerpro.

[camaro1995]

Adx is the data stream definition file you need. Also be sure you have the correct port selected on tunerpro.

Thanks for fast response...

Under Data Acq./Emulation Test for Valid Interface Using Settings I get "Cable found and functional" on COM1.

I just realised that I only had ads, xdf and bin files yesterday when I was trying... I managed to get adx for my ecu.

Will try my luck when I get home.

Also I`m trying to connect via ALDL cable via real com port rs232 if this has any effect.

[ralmo94]

Ads pre dates adx. Are you sure it's $88 ?

[camaro1995]

Ads pre dates adx. Are you sure it's $88 ?

Yes it is listed on Tuner Pro website... 1227730 ecm, 90-92 F-body, LH0 v6 engine... this info is all correct, I had also seen reports of people succesfully connecting to 91 v6 3.1 Camaro with $88 files...

[dave w]

http://www.gearhead-efi.com/Fuel-Inj...Information-88