First of thanks for add. I have already gained much knowledge so far. I have a 2003 chevy 1500hd 6.0 lq4 4l80e 4x4. I downloaded pcm hammer, logger and tunerpro.. what else do I need to begin tuning this ? I am kind of stuck here now
First of thanks for add. I have already gained much knowledge so far. I have a 2003 chevy 1500hd 6.0 lq4 4l80e 4x4. I downloaded pcm hammer, logger and tunerpro.. what else do I need to begin tuning this ? I am kind of stuck here now
If you are using tunerpro, you'll need an XDF file. It defines the file you read from the pcm into tables flags and scalers. The one you need depends on the operating system number. Another option is to use universal patcher, it's a new tool that as far as I know works on all p01 &p59 os's. It does NOT require you to find a definition file. If you still plan on using tp instead, it can still be useful to open your bin file in UP to find out what OS you have if you don't already know. Hope that helps.
Universal Patcher can be found here.
http://www.gearhead-efi.com/Fuel-Inj...versal-Patcher
No need to re-invent the wheel. But we can make it better
thanks for the information. i was unaware of Universal patcher.. i cant seem to get it tp download and install correctly is there a write up or a different link. after downloading and trying to extract it says the folders are empty..
Sounds wierd, I hope you have better success with UP.
No need to re-invent the wheel. But we can make it better
Bookmarks