Thanks for the add.

I've got a 5.3 L59 from a 2006 Yukon that I've rebuilt and I'm swapping into my old jeep YJ. I'm converting it to a manual trans from the 4L60. I'm much more of a gearhead than an ECM tuner but no worries.

I had the whole Yukon as a donor so I was able to pull the entire harness, DBW, efans etc.

The manual trans swap is probably what I'll be asking the most questions about. I don't know anything about segment swaps but I'm trying get read up on it. It seems like getting it running with just a vats delete is no big deal so I can figure it out as I go.

The stock P59 is using 12619623 OS. From what I've read so far (which is probably a drop is the bucket) is an XDF yet for that OS has not been developed but the 12587811 should work...not sure ?

anyway, I'm still reading to make myself just dangerous enuff before I go rapid-fire with questions.

Any advise is appreciated.