Results 1 to 2 of 2

Thread: Fuel flow number inconsistency

  1. #1
    Fuel Injected!
    Join Date
    Jun 2022

    Fuel flow number inconsistency

    I purchased a fuel pressure regulator spring from tbi chips that is made to boost my fuel pressure to 18 psi on 55 lb injectors. He said it will boost the flow rate to 72. The problem I'm having is that with the EBL utility I get a calculation significantly lower than 72 when I enter those numbers. To get 72# I have to enter 61# injectors into the utility @ 18psi. The entire point of buying the spring was to avoid purchasing new injectors unless I planned to go above about 325 horsepower, which I don't.

    Are these numbers correct? Which numbers should I use and anyone know the offset?

    Thanks in advance.
    Last edited by Purv-Dawg; 09-21-2022 at 07:33 PM.

  2. #2
    Fuel Injected! PlayingWithTBI's Avatar
    Join Date
    Dec 2018
    Tonopah, AZ
    I'd believe the EBL Utility.

Similar Threads

  1. Fuel Injector Flow Bench ???
    By stew86MCSS396 in forum GM EFI Systems
    Replies: 2
    Last Post: 01-17-2019, 10:47 AM
  2. Fuel injector flow rate in $A1 for the 7730
    By woody80z28 in forum GM EFI Systems
    Replies: 7
    Last Post: 03-06-2018, 06:40 AM
  3. Homemade Ardunio fuel injector flow bench
    By CDeeZ in forum GM EFI Systems
    Replies: 2
    Last Post: 03-04-2018, 10:12 AM
    By Ruffneck Rill in forum GM EFI Systems
    Replies: 7
    Last Post: 05-12-2015, 05:34 AM
  5. A217 $0D TP5 v250 adx, injector flow and fuel useage
    By JeepsAndGuns in forum GM EFI Systems
    Replies: 13
    Last Post: 12-02-2012, 03:12 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts