Page 3 of 3 FirstFirst 123
Results 31 to 39 of 39

Thread: Changing os issues

  1. #31
    Fuel Injected!
    Join Date
    Aug 2022
    Posts
    30
    I think I figured it out, the xdf I am using 8322 doesnt work for this os or fixed checksum os .

  2. #32
    Fuel Injected!
    Join Date
    Aug 2022
    Posts
    30
    this os 8322 xdf file
    Attached Files Attached Files

  3. #33
    Fuel Injected! Pulse_GTO's Avatar
    Join Date
    Aug 2020
    Age
    46
    Posts
    174
    Try this XDF. Make sure to copy the checksum file into your "Plugins" folder in your "TunerPro Files" folder. When you save a bin with this XDF it will automatically make sure the checksums are correct.
    Attached Files Attached Files

  4. #34
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    54
    Hello, I came to this thread after seeing your post on pcmhacking. I'll continue here as this is where most the thread is already. First of all - Its bad to just 'fix' checksums. They indicate the file is damaged, and fixing the checksum doesnt fix the actual problem, it just hides it. Especially being operating system segment the file might not work on the car at all, or not work when something specific happens like A/C comes on. Best to delete those files and not use them.

    Here are the 2001 Silverado bins I have on file. I'd suggest writing the OS from one of these on the new PCM, then writing the parameter block from the old pcm to the new pcm for the clone. This way you should end up with a good OS on the new pcm.

    [12:45:54:878] Thanks for using PCM Hammer.
    [03:54:03:374] Examining S:\P01_P59 Bins\2001 Silverado 5.3 Auto 12208322.bin
    [03:54:03:394] Validating 512k file.
    [03:54:03:398] Start End Stored Needed Verdict Segment Name
    [03:54:03:412] 00000 7FFFD 7F53 7F53 Good Operating system
    [03:54:03:416] 08002 13FFF A39A A39A Good Engine calibration
    [03:54:03:420] 14002 16DFF 467A 467A Good Engine diagnostics.
    [03:54:03:424] 16E02 1BDFF 81E0 81E0 Good Transmission calibration
    [03:54:03:430] 1BE02 1C7FF B4CC B4CC Good Transmission diagnostics
    [03:54:03:437] 1C802 1E51F C4DD C4DD Good Fuel system
    [03:54:03:446] 1E522 1EE9F 51C5 51C5 Good System
    [03:54:03:452] 1EEA2 1EF9F 202C 202C Good Speedometer
    [03:54:03:459] All checksums are valid.
    [03:54:14:659] Examining S:\P01_P59 Bins\2001 Silverado 4.8 Auto 12208322.bin
    [03:54:14:681] Validating 512k file.
    [03:54:14:688] Start End Stored Needed Verdict Segment Name
    [03:54:14:697] 00000 7FFFD 7F53 7F53 Good Operating system
    [03:54:14:706] 08002 13FFF DD50 DD50 Good Engine calibration
    [03:54:14:715] 14002 16DFF 0FAB 0FAB Good Engine diagnostics.
    [03:54:14:724] 16E02 1BDFF 1EF9 1EF9 Good Transmission calibration
    [03:54:14:733] 1BE02 1C7FF B4CC B4CC Good Transmission diagnostics
    [03:54:14:744] 1C802 1E51F BE67 BE67 Good Fuel system
    [03:54:14:755] 1E522 1EE9F 4BF1 4BF1 Good System
    [03:54:14:766] 1EEA2 1EF9F 3BEC 3BEC Good Speedometer
    [03:54:14:777] All checksums are valid.
    [04:00:48:394] Examining S:\P01_P59 Bins\2001 Silverado 6.0 Auto 4L80 12208322.bin
    [04:00:48:422] Validating 512k file.
    [04:00:48:434] Start End Stored Needed Verdict Segment Name
    [04:00:48:446] 00000 7FFFD 7F53 7F53 Good Operating system
    [04:00:48:458] 08002 13FFF 8FB6 8FB6 Good Engine calibration
    [04:00:48:474] 14002 16DFF 2AAC 2AAC Good Engine diagnostics.
    [04:00:48:487] 16E02 1BDFF 0853 0853 Good Transmission calibration
    [04:00:48:503] 1BE02 1C7FF EDDD EDDD Good Transmission diagnostics
    [04:00:48:517] 1C802 1E51F 1D08 1D08 Good Fuel system
    [04:00:48:531] 1E522 1EE9F 4EAB 4EAB Good System
    [04:00:48:553] 1EEA2 1EF9F 22CB 22CB Good Speedometer
    [04:00:48:569] All checksums are valid.
    [04:00:53:404] Examining S:\P01_P59 Bins\2001 Silverado 8.1 Auto Allison 12208322.bin
    [04:00:53:443] Validating 512k file.
    [04:00:53:460] Start End Stored Needed Verdict Segment Name
    [04:00:53:477] 00000 7FFFD 7F53 7F53 Good Operating system
    [04:00:53:493] 08002 13FFF B50B B50B Good Engine calibration
    [04:00:53:509] 14002 16DFF 878E 878E Good Engine diagnostics.
    [04:00:53:526] 16E02 1BDFF DDA5 DDA5 Good Transmission calibration
    [04:00:53:542] 1BE02 1C7FF 109A 109A Good Transmission diagnostics
    [04:00:53:558] 1C802 1E51F 9441 9441 Good Fuel system
    [04:00:53:574] 1E522 1EE9F 7364 7364 Good System
    [04:00:53:590] 1EEA2 1EF9F 22CB 22CB Good Speedometer
    [04:00:53:606] All checksums are valid.

    For the turn ignition off then main power, that applies mainly for saving a vin change. It doesnt hurt to do it for flashing, but when the pcmhammer kernel is running there is nothing to do the rams save when you power down - that applies to the factory operating system

    For the XDF they can all update the calibration segment without a plugin. Plugin is only where there is an operating system checksum configured, and its only needed for XDFs that have a code patch to the operating system. As above fixing a bad OS checksum from genuine corruption is bad.

  5. #35
    Fuel Injected! Pulse_GTO's Avatar
    Join Date
    Aug 2020
    Age
    46
    Posts
    174
    I've done what Antus suggested with the 2001 Silverado 5.3 file and the original 2001 chevroletsilverado - Copy file. The result I'm posting here for people to check and make sure I did it correctly. I'm sorry I was not able to help more, but I'm taking advantage of this as a great learning opportunity.
    Attached Files Attached Files

  6. #36
    Fuel Injected!
    Join Date
    Aug 2022
    Posts
    30
    So what your telling me is the original 2001 bin file ( file to be cloned) was a bad or corrupt file ?

  7. #37
    Fuel Injected!
    Join Date
    Aug 2022
    Posts
    30
    Going to have a few questions .
    Will I have to take the Universal Patcher out of my Tunerpro file? Use both Pcmhammer and Tunerpro all stock?
    Will I be able to use the original XDF files for OS 8322? or that is not relevant?

    I have researched tuning and pcm hacking for a while, but it seems to me that tutorials are lacking.

    I apologize in advance for my tech incompetence . and appreciate the patience .

  8. #38
    Fuel Injected!
    Join Date
    Aug 2022
    Posts
    30
    It seems these XDFs dont work for my PCM
    They keep changing the OS and can't be used with the OS 12208322.
    I am not using another Plug-in for Tuner-Pro.
    I am goin to look into another XDF file or so.
    Attached Files Attached Files

  9. #39
    Fuel Injected!
    Join Date
    Aug 2022
    Posts
    30
    I finally figured it out, I had a plug-in on the os part of the xdf and it would "fix" the os and it didn't work out in Pcmhammer. I have the os situation figured out and read it on my LSDROID app and all is well . Fingers crossed, Thank You ANTUS ! and PULSE_GTO !

Similar Threads

  1. Charging system issues after changing over to 7603 tune.
    By Brainless1 in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 03-19-2021, 05:05 AM
  2. Changing PCM OS number
    By ericwknapp12 in forum OBDII Tuning
    Replies: 4
    Last Post: 06-17-2020, 11:40 AM
  3. tbi fpr pressure changing
    By typhoonss92 in forum GM EFI Systems
    Replies: 5
    Last Post: 06-20-2019, 03:21 AM
  4. Changing Stoich in $0D
    By brian617 in forum GM EFI Systems
    Replies: 13
    Last Post: 10-23-2013, 03:25 AM
  5. Changing from $88 to $8D mask, bin.
    By fasteddi in forum GM EFI Systems
    Replies: 81
    Last Post: 02-12-2012, 07:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •