Results 1 to 8 of 8

Thread: Ghost cam, decel popping exhaust LT1

  1. #1
    Fuel Injected!
    Join Date
    Apr 2020
    Location
    Belarus
    Age
    35
    Posts
    152

    Ghost cam, decel popping exhaust LT1

    Hey guys, anybody knows how to make a popcorn exhaust on deceleration?
    Ghost cam is pretty easy to do. I've done it. Works good. but can't get how to make popping?
    I know, I have to do smth with dfco and decel timing. Timing is easy, but what about dfco setup for lt1?

  2. #2
    Fuel Injected! Terminal_Crazy's Avatar
    Join Date
    Oct 2015
    Location
    Lancashire England
    Posts
    410
    Quote Originally Posted by yoheer View Post
    Hey guys, anybody knows how to make a popcorn exhaust on deceleration?
    Ghost cam is pretty easy to do. I've done it. Works good. but can't get how to make popping?
    I know, I have to do smth with dfco and decel timing. Timing is easy, but what about dfco setup for lt1?
    How about a write up on what you've done to acheive that.


    Mitch
    '95 Z28 M6 -Just the odd mod.
    '80 350 A3 C3 Corvette - recent addition.

  3. #3
    Fuel Injected!
    Join Date
    Apr 2020
    Location
    Belarus
    Age
    35
    Posts
    152
    Idle stabilization timing advance and retard both to 15-20 degrees for ghost cam
    Closed tps timing above 1200rpm to 0-10 degrees on ur taste. But i dont like it. It is just a few BANGS instead of popping, so it is required to play aroud DFCO. Im afraid of my muffler explosion. Need somebodys advice.

  4. #4
    Fuel Injected!
    Join Date
    Jan 2021
    Location
    Deep in the heart of Texas
    Posts
    62
    Just curious, what is the purpose? I’ve always tried to get rid of decel pop.

  5. #5
    Fuel Injected!
    Join Date
    Apr 2020
    Location
    Belarus
    Age
    35
    Posts
    152
    To make some noise :) just for fun

  6. #6
    Fuel Injected!
    Join Date
    Apr 2020
    Location
    Belarus
    Age
    35
    Posts
    152
    Who knows the algorithm of Traction Control operation?
    All I know that it gives a retard upon a request.
    What conditions must be met to get a retard?
    There are 3 inputs for it in the pcm
    1. Retard request-this is clear. Pin to the ground is supposed to pull timing
    2. System active-When is it active? Is it always active on KOEO/KOER or must get feedback from TCS/ASR module? (Probably GND)
    3. TP signal- Will it operate without this signal or this is requered? If yes what is requered? It seems there is only one output in TCS module to PCM. So it can get throttle position with serial data. Maybe. So it can be logical 1 or 0. Or TP value like 0.5-3.5V
    Attached Images Attached Images

  7. #7
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884
    by acciedent if you can get the timming under 0 degrezz it will pop and crack i think,tunning in the drive way deceleration my did and its stock 4.3 with a boat cam and stock exhast sys.

  8. #8
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    disable DFCO, reduce timing advance in low MAP columns, and it'll pop, but it would be more efficient to tune the driver to not be a total poser

Similar Threads

  1. Replies: 5
    Last Post: 10-16-2021, 12:12 AM
  2. faster rpm decel using ignition tables?
    By Project23 in forum Ford EFI Systems
    Replies: 0
    Last Post: 08-05-2020, 02:30 AM
  3. decel stall
    By Superbee in forum GM EFI Systems
    Replies: 2
    Last Post: 07-30-2014, 06:55 PM
  4. AE clamp Flag in $0D ?" and no fuel in decel?
    By EagleMark in forum GM EFI Systems
    Replies: 7
    Last Post: 04-21-2013, 08:25 AM
  5. 4L80E+decel lockup
    By gregs78cam in forum GM EFI Systems
    Replies: 1
    Last Post: 08-05-2011, 06:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •