Hi All, new member here. I have a quick question that will probably be easy for someone. I'm new to OBDI tuning and have been trying to figure things out. I was looking through the Bin and definition files which are great.

I have a 1994 C1500 with a 305 and 4L60e my PCM is the 16196395 which from everything I have found here uses a $0E was used in the 5.7 and 7.4L HD trucks with the 4L80E. So, I can't seem to find a xdf file that has information for the 4L60e. I did find my Bin BHMD listed under the 16197427 PCM which I guess uses a $0D. I did find an xdf file here that seems to work at least as far as I can tell.

I don't really know what the difference is between $0E and $0D and right now I'm just poking around in there trying to see what everything is. But question is will using the xdf file from the 16197427 PCM have any negative impacts when I do decide to try and burn a chip? If so does anybody know of a good xdf file I could use that will work with the 16196395 PCM and a 4L60e?

Thanks for any advice you might have.