Results 1 to 7 of 7

Thread: TBI tuning gear

  1. #1
    Fuel Injected!
    Join Date
    May 2014
    Age
    38
    Posts
    21

    TBI tuning gear

    I'm trying to get started in tuning my LO3 Camaro.

    Lots of dead product links out there in writeups and discontinued products on vendor pages as well.

    I have an ALDL cable that works.

    But I'm looking for an emulator and/or burner set-up that works with TunerPro. What's the current "go to" for that hardware?

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    5,820
    Dynamic EFI EBL Flash is an option ($450 with ECM) that solves ALL the hard to find / obsolete tuning hardware challenges: https://www.dynamicefi.com/EBL_Flash.php

    The factory chip can be erased with Ultra Violet (UV) light and reprogrammed with a chip programmer: https://www.amazon.com/PRG-109-GQ-4X...6009498&sr=8-6

    The chip file is called a binary or .bin file.

    TunerPro or TunerPro RT can edit the .bin file.

    dave w

  3. #3
    Fuel Injected!
    Join Date
    May 2014
    Age
    38
    Posts
    21
    Thanks for the links Dave.

    I've been considering that EBL Flash setup but I had started getting interested in doing more than just this one car and was wondering what was still available.

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    5,820
    The obsolescence of OBD1 is here and now.

    If someone is just starting out with EFI Tuning, OBD2 Tuning is the future and worth investing money and time into.

    dave w

  5. #5
    Fuel Injected!
    Join Date
    May 2014
    Age
    38
    Posts
    21
    I understand that but I don't have anything that's OBD2 that I want to mess with right now. Pulling the PE delay out of my black box ECM 5.7L Vortec doesn't really justify the cost of the equipment to do it.

    This Camaro is a nice, stock survivor. I just want to tweak it a little bit and maybe throw some headers and a mild cam in it just to have something to play with.

    Maybe a G8 GT or some other LS powered toy is in my future, but it's a distant future when I'm not still trying to feed and clothe the offspring.

  6. #6
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    5,820
    The EBL Flash system is a very good option, if the budget will allow it. The documentation included with EBL Flash is very good

    When the time comes to sell the LO3 Camaro, re-installing the original factory ECM could be an option.

  7. #7
    Fuel Injected!
    Join Date
    Mar 2012
    Age
    35
    Posts
    367
    find a used moates autoprom, burn2 &ostrich for sale. they are usually lightly used, less than new and come up often on this forum.

    the "goto" for the last 10+ years has been the equipment mentioned above. I wouldn't waste your time with a uv chip burner myself

Similar Threads

  1. Hello Gear Heads
    By Burb in forum Introductions
    Replies: 2
    Last Post: 08-24-2021, 06:05 AM
  2. New Gear Head
    By Joeshifty74 in forum Introductions
    Replies: 1
    Last Post: 10-11-2019, 04:38 PM
  3. wtb obd1 tuning gear
    By trippyjoey in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 08-25-2014, 12:55 AM
  4. 305 TPI dies when put in gear
    By greggbruceauto in forum GM EFI Systems
    Replies: 3
    Last Post: 12-17-2013, 11:41 PM
  5. Hi from another gear head
    By Big Al in forum Introductions
    Replies: 5
    Last Post: 10-28-2012, 11:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •