2005 GMT-800 P59 PCM VATS Delete

[K5MOB]

I have a 2005 GMC 1500 4.3L, Distributor, DBC, 4L60E Trans and a P59 PCM. I would like to delete the vats.

I can not locate a XDF a file for the PCM.

Can some one point me in the direction of how to make a XDF or maybe if they know what bit turns off the VATS. I would even settle for a software load that has a working XDF I could flash to the PCM.

I have been searching for a solution to this issue for a few days now and just cant seam to find something.

Thanks for looking.. Here is the info from PCM hammer. I can post a bin if you need..

[11:44:01:117] PCM Hammer 021
[11:44:01:126] Monday, June 20 2022 @11:44:01:12
[11:44:01:131] Initializing J2534 Device
[11:44:01:184] Loaded DLL
[11:44:05:543] Connected to the device.
[11:44:05:588] Battery Voltage is: 12.159
[11:44:06:391] Thanks for using PCM Hammer.
[11:44:36:589] VIN: 1GTEC14X45Z166857
[11:44:36:695] OS ID: 12592618
[11:44:36:717] Hardware Type: P01_P59
[11:44:36:795] Calibration ID: 12591721
[11:44:36:860] Hardware ID: 12589161
[11:44:37:068] Serial Number: 0MA030D04278
[11:44:37:128] Broad Cast Code: YHZP
[11:44:37:189] MEC: 0

Thanks
Sam

[kur4o]

Did you check this thread here,
http://www.gearhead-efi.com/Fuel-Inj...S1-OS-for-free

[K5MOB]

Did you check this thread here,
http://www.gearhead-efi.com/Fuel-Inj...S1-OS-for-free

No I did not see that in my searches.. My search foo was week!!

The DL link in that thread was bad, however I did find a thread with a working link.

Universal Patcher worked perfect!!

Thanks!