I'm sure it's out there, if anyone has a link, I would appreciate it.

Hadn't actually looked at one of the later ECM setups until tonight. Pulled the V6 memcal out, and took the cover off.

Prom portion is easy. Netres I think I've got figured out based on this post http://www.thirdgen.org/techboard/po...66-post39.html (jumper pin 10 to 13).

The knock "board" I haven't quite figured out. Conventional wisdom says the V6 knock setup won't work correctly on a V8. Got it. Not a whole lot of the V8 knock boards I can get my hands on, at least out of cars.

Trucks of the proper vintage on the other hand, are still fairly common. From say, a 1993 350 TBI truck, will the knock board interchange with the '727/730?

Thanks as usual! :)