Results 1 to 7 of 7

Thread: help in understanding lt1 ecm to ls1 ecm transmission calibration

  1. #1
    Fuel Injected!
    Join Date
    Apr 2020
    Posts
    22

    help in understanding lt1 ecm to ls1 ecm transmission calibration

    so i have a issue i hope someone can help me with i just swapped my 95z28 camaro ecm to a 411 ecm i had the torguehead 24x installed and they sent me the 411 pcm with a stock tune but i have swapped rear end and different size tires so this is what i used on tuner pro to calibrate my ecm when it was a 95 camaro ecm speedofix.PNG this is using a xdf for a 12212156 os transfix1.PNG its the only thing i could find that looks like something to do with the speedo .
    now i have the compare up for both xdf's the 95 and the 12212156 ecm my question is can i use either xdf and just switch the numbers so i can calibrate my transmission speedo or am i completly wrong
    so the top numbers are the 1221216 ecm numbers and the copy numbers are my 95 speedo calibrations
    Last edited by mullettcar; 05-29-2022 at 07:56 PM.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    5,820
    One possible option for the '0411 is BlueCats Transmission Table Software: https://forum.hptuners.com/showthrea...Table-Software

    dave w

    BlueCats.jpg

  3. #3
    Fuel Injected!
    Join Date
    Apr 2020
    Posts
    22
    i guess what im asking is if these are the scalers for adjusting the speedo
    Attached Images Attached Images

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    5,820
    BlueCats uses the vehicle gear ratio and tire size to calculate the speedometer parameters and shift parameters for the '0411 pcm.

    The screenshots below show some of the scalers in your list. I'm suggesting BlueCats because most, if not all the scalars you requesting are provided by BlueCats. The screenshots show some scalers for 3.23 gears and a tire diameter of 24.91 inches. BlueCats is plug-n-play for HP Tuners. BlueCats has the scaler information needed for TunerPro, just need to deep dive for it.

    dave w

    3.23 Gears _ 24.91 Tire Diameter.jpg

    Speedometer _ Shift Parameters.jpg

  5. #5
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    5,820
    BlueCats attached.

    dave w
    Attached Files Attached Files

  6. #6
    Fuel Injected!
    Join Date
    Oct 2013
    Posts
    1,019
    H0105 should be the output for the speedometer. 4000 pulses per mile. If you mean to calibrate then I think H0101 to H0104 are used. The outputs are for PCM outputs to other components (TCS, cruise, speedo).

  7. #7
    Fuel Injected!
    Join Date
    Apr 2020
    Posts
    22
    thank you that is what i was thinking but i wasnt completly sure

Similar Threads

  1. understanding .xdf, .bin, and OS
    By RH_K1500 in forum OBDII Tuning
    Replies: 3
    Last Post: 05-15-2021, 05:02 AM
  2. Trouble understanding BIN
    By drowning in tbi in forum GM EFI Systems
    Replies: 12
    Last Post: 03-03-2021, 03:34 AM
  3. Help understanding cts spark
    By myburb in forum GM EFI Systems
    Replies: 7
    Last Post: 07-26-2016, 10:32 PM
  4. Need help Understanding INT and BLM
    By ZEDRATED in forum GM EFI Systems
    Replies: 0
    Last Post: 05-12-2015, 11:09 PM
  5. understanding what the engine is doing.
    By drewkimble48 in forum GM EFI Systems
    Replies: 7
    Last Post: 01-01-2015, 05:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •