this thing is killin me

[doghouse]

383 sbc, accel super ram int, using 1990 tpi ecm, (SN 1227730) C1432

was running great, changed pass side valve cover gasket, now won't start,
checked ign, has great spark, ..........will start with starter fluid, but won't stay running,
do not hear fuel pump, jumper 12v to gray pump wire, hear pump, but still no start, (thinking no power to inj ?)
checked orange wire to ecm C16 term has power, but orange wire next to it does not, ( just thought I had fuel pump relay
dis connected) (??)
I have connected ground jumper to black wire on FP relay
I have no power to FP relay orange or red,
not using fuel pump/oil pump press switch, just not connected to anything, been that way for yrs,

I see no fuses on the panel bad, checked conntinuity on all fuses, ,
anyone have any ideas?

thx

[doghouse]

never mind, I just lit the garage on fire , so no need to fix it,

actually , found a add on fuse stuck under the AC box, powers the fuel pump relay , and it was burned,
replaced it, and the POS runs, DSC08330.jpg