Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: 283 TBI

  1. #1
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    55
    Posts
    46

    283 TBI

    Hey all,

    It's been a few years since I've been on here but I'm starting a new TBI swap project. I'm building a 61 Impala 283/3 on the tree and have decided to install TBI for drivability/reliability. I pulled all my TBI stuff from a 1991 Chevy conversion van I scrapped. Last TBI project I did was a 307 sbc into an 86 Astro van and thanks to the vast wealth of TBI knowledge on here, it worked out really nice.

    Looking forward to digging into another one.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,285
    Did the 1991 Chevy Van have ECM 1227747?

  3. #3
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    55
    Posts
    46
    I'm not sure; I'll have to check that.

  4. #4
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    55
    Posts
    46
    Yep, that’s what it is.

  5. #5
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,285
    Gearhead-efi link for information about the 1227747 computer: http://www.gearhead-efi.com/Fuel-Inj...Information-42

  6. #6
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    55
    Posts
    46
    Right on, thanks. When I did my Astro I did the chip socket change and added the ZIF socket. Worked out really nice to burn my own chips. I'm planning on doing the same for this one.

  7. #7
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,285
    Link to a 7747 Flash Chip Conversion: http://www.gearhead-efi.com/Fuel-Inj...sion-(27SF512)

  8. #8
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    55
    Posts
    46
    Thanks!
    So this TBI system has a Fuel Pump Cycle Controller. I don’t recall that on the last TBI I set up. Anyone know anything about it?

  9. #9

  10. #10
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    55
    Posts
    46
    Yep, that looks like it. Looks like they didn't all have it; I wonder if you can delete it?

  11. #11
    Fuel Injected!
    Join Date
    Mar 2012
    Age
    36
    Posts
    459
    you can just unplugged and it will work normally (default 2-3 second prime). they are also called a "hot start module" i guess used if you got vapor lock you could turn the key on and it would run cool fuel through the system.

  12. #12
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    55
    Posts
    46
    Cool, thanks

  13. #13
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    55
    Posts
    46
    Do I need to run a VSS on a manual transmission? I'm pretty sure the one I had in my 1986 Astrovan V8 swap didn't use one but I cant remember for sure.

  14. #14
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,285
    Quote Originally Posted by falconvan View Post
    Do I need to run a VSS on a manual transmission? I'm pretty sure the one I had in my 1986 Astrovan V8 swap didn't use one but I cant remember for sure.
    There's been debate if the VSS is "nice to have" or "necessary to have"? Stalling at slow downs to stop lights / stop signs is not nice. The factory used a VSS with manual trans.

    https://jagsthatrun.com/collections/speed-sensors

    https://jagsthatrun.com/collections/...ce-holder-4pac

  15. #15
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    55
    Posts
    46
    Quote Originally Posted by dave w View Post
    There's been debate if the VSS is "nice to have" or "necessary to have"? Stalling at slow downs to stop lights / stop signs is not nice. The factory used a VSS with manual trans.

    https://jagsthatrun.com/collections/speed-sensors

    https://jagsthatrun.com/collections/...ce-holder-4pac

    Makes sense; for that low of a price I'll go ahead and do it.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •