5.3 4l60e dbw swapped into 1987 camaro

[ricardosanchez22]

Hey guys so I'm almost done with my swap I already deleted vats via tuner Pro and lsdroid only problem I'm facing now is that when I connect my pedal to the dbw module my car revs really high and no response on my pedal. originally everything came off a 03 suburban had to go with a 04 bin and xdf so I can be able to modify my pcm since I've heard there is no xdfs for 03 bins. I'm trying to see if maybe I missed something on tuner Pro or what I'm doing wrong any advice on this matter I would greatly appreciate it.

[MO LS Noobie]

Pedal, TAC module, PCM, and throttlebody must match with few exceptions. If they do, check the darta and see what is wacky.

[ricardosanchez22]

Everything that came off the truck is the same of what im using.

[Pulse_GTO]

I've heard, now take this with a grain of salt, that the OS has to match the hardware installed. What was your original 2003 bin OS? What base file and OS did you use for your 04 bin file?

[ricardosanchez22]

03 bin os 12579405 and for the 04 part i downloaded a 04 bin from lsdroid facebook page named:04 chevy 1500 4x2 lm7 12587603 bin and for the xdf i download: 12587603-release xdf

[Pulse_GTO]

03 bin os 12579405 and for the 04 part i downloaded a 04 bin from lsdroid facebook page named:04 chevy 1500 4x2 lm7 12587603 bin and for the xdf i download: 12587603-release xdf

Would you be able to post the originl bin that came with the PCM and the current file that is giving you issues?

[ricardosanchez22]

How can I send you those files? Im trying to send them to you through here but I cant see how. Is there anyways I can email them to you? i have the original file that came with my pcm and I have the modified file as well. Let me know how I can send you those files Thank you.

[Pulse_GTO]

How can I send you those files? Im trying to send them to you through here but I cant see how. Is there anyways I can email them to you? i have the original file that came with my pcm and I have the modified file as well. Let me know how I can send you those files Thank you.

Just post them here so others can help as well.

[MO LS Noobie]

How can I send you those files? Im trying to send them to you through here but I cant see how. Is there anyways I can email them to you? i have the original file that came with my pcm and I have the modified file as well. Let me know how I can send you those files Thank you.

Down below after you hit reply, there is a button "advanced" then you can upload your files.

[ricardosanchez22]

okay i got it thanks so the one labeled 87camarolsswap is the original 03 suburban bin and then the second attachement named 04 chevy is the new bin I used and then used an xdf that matched the bin number to modify the new bin.

[Pulse_GTO]

okay i got it thanks so the one labeled 87camarolsswap is the original 03 suburban bin and then the second attachement named 04 chevy is the new bin I used and then used an xdf that matched the bin number to modify the new bin.

I compared the two files and there were only a couple of differences between them regarding the ETC stuff. I copied over the ETC values from camaro87lsswap.bin over to the 04 Chevy 1500 4x2 LM7 12587603.bin. I don't think they'll make much of a difference, but it's worth a shot.

[ricardosanchez22]

Ill download it and ill flash it to my car i will let you know how my dbw setup acts with this file thank you for taking time out of your day to help me out.

[ricardosanchez22]

I was thinking when I flashed my pcm I had the tac module all of it was unplugged could that be a issue?

[Pulse_GTO]

I was thinking when I flashed my pcm I had the tac module all of it was unplugged could that be a issue?

That should not be a problem .

[MO LS Noobie]

I agree, but if you think might be, flash over it, cannot hurt