Results 1 to 5 of 5

Thread: Access forbidden

  1. #1
    Carb and Points!
    Join Date
    Apr 2022
    Age
    30
    Posts
    7

    Access forbidden

    I’ve been looking everywhere for an xdf for my 2005 5.3 so I can use tunerpro
    and I finally found a thread on here saying to use an 2004 and it gave a link but when I click
    the it is says “ forbidden 403 error” can anyone help me out? This is for a 1965 f100 ls swap by the way.
    thanks
    Last edited by Jbonestokes; 04-09-2022 at 04:41 PM.

  2. #2
    Fuel Injected!
    Join Date
    Nov 2019
    Location
    Bossier City, Louisiana
    Age
    63
    Posts
    337
    What PCM and what OS are you looking for . . . 7603??? The error you post above means the file you are looking for at that URL is no longer available. What transmission in the F100?

    Rick
    1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's

  3. #3
    Carb and Points!
    Join Date
    Apr 2022
    Age
    30
    Posts
    7
    Yeah the OS im looking for is 7603. i guess im not sure what you mean about the PCM... i have many different ones i can choose from.
    the F100 has a 5.3 with 4l80 and we have a 1966 c10 that has a 5.3 with 4l60. i have LS droid and tunerpro and obdlink. im trying to get this figured out for my friend that does all the work except for the computer side of things and hes planing on doing more swaps this summer. thanks

    isaiah

  4. #4
    Fuel Injected! ralmo94's Avatar
    Join Date
    Feb 2020
    Posts
    375
    Quote Originally Posted by Jbonestokes View Post
    Yeah the OS im looking for is 7603. i guess im not sure what you mean about the PCM... i have many different ones i can choose from.

    isaiah
    I Believe he was asking if 1meg or 512, basically p01 or p59, 0411, or ????

    Quote Originally Posted by Jbonestokes View Post
    i have LS droid and tunerpro and obdlink
    You Could Skip the XDF and try out Universal Patcher. Takes a little getting used to, some terminology is a little different
    like instead of VATS for Vehicle Anti Theft System, its VTD for Vehicle Theft Deterrent.

    But you can compare values of bins from different OS's, something you can't do with tuner pro.
    If this is all swaps, you could configure a bin on a supported OS, for P01 or P59 depending on what you have, and have one for 4l60, one for 4l80, one for manual, and just use your starter bin on each swap regardless of what was originally in the PCM.

    Hope that helps

    Edit: Be aware that some Drive by Wire p59's do NOT have an IAC Driver and are reported to Brick if you flash a drive by cable file to them, due to unsupported hardware.
    Last edited by ralmo94; 04-10-2022 at 07:25 PM.
    No need to re-invent the wheel. But we can make it better

  5. #5
    Carb and Points!
    Join Date
    Apr 2022
    Age
    30
    Posts
    7
    Serv. No. 12589463
    Hdw. No. 12589162
    This is from the pcm I’m trying to write… I have a 2005 5.3 for it can it be done? Or should the swap donors just be 2003 or older?
    Last edited by Jbonestokes; 04-11-2022 at 06:01 PM.

Similar Threads

  1. Anybody have access to a 7427 7,4 memcal?
    By sturgillbd in forum GM EFI Systems
    Replies: 8
    Last Post: 03-09-2015, 05:11 AM
  2. Guests, New Members read this to access forums
    By EagleMark in forum Introductions
    Replies: 0
    Last Post: 02-19-2011, 05:11 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •