I am guessing I didn’t do my question correctly. I know what the stock 95/94 injectors spec at and look like. When I took mine apart it had one stock gm injector in one side and the odd ball in question on the other side. It is the odd ball that I am trying to identify. Who makes it. It worked fine so my guess it is some kind of replacement for gm injectors.
6395, BHDF, 7.4 BBC lightly modded now 6395 BMHM back to BHDF
Was there any kind of part number or marking on it?
No need to re-invent the wheel. But we can make it better
O'Reilly auto shows AC Delco, and Standard Ignition, brands.
Rock auto shows Auto line, and GB remanufacturing
AutoZone shows GP Sorensen, AUS Injection,
Napa shows a new one from Echlin
Last edited by ralmo94; 04-08-2022 at 12:09 AM.
No need to re-invent the wheel. But we can make it better
all the pictures show red insulation ( if that's what you call it ) on the electric leads.
Yours are black?
Maybe someone replaced it with the wrong one?
No need to re-invent the wheel. But we can make it better
After my last post I ran across an old post on a Camaro board and had pics of injectors that looked the same and came from a 305 in a camaro. They never did ident them and then the thread got off track. Mine had no numbers but one of the ones in the other thread had a partial 01B20(8) ??. I am wondering if they were out of some sort of a marine installation.
6395, BHDF, 7.4 BBC lightly modded now 6395 BMHM back to BHDF
Seems like I remember reading that they used the same injectors as low pressure 305 when they cranked the psi?
If you look up 305 injectors, do they look the same?
No need to re-invent the wheel. But we can make it better
Any 305 injectors I have seen look the same as any other gm tbi injectors. Here is pics of the injectors on the camaro site
6395, BHDF, 7.4 BBC lightly modded now 6395 BMHM back to BHDF
Seems to look the same on sierra marine also?
No need to re-invent the wheel. But we can make it better
Posting Permissions
Reply With Quote
Bookmarks