sorry just realize my caps was on lol
sorry just realize my caps was on lol
If you are talking about the xdf I linked, it's version 6.Originally Posted by apborione
No need to re-invent the wheel. But we can make it better
ohh ok kool.i tell you im new to all of this..now ihave to figure out how to export to thde pcm
was looking at your bin.
I can confirm you are 2156 OS, but the 8th letter of the vin is V which means LR4 4.8. Did you get the pcm with the engine?
Are you sure its a 5.3 and not the 4.8? They look the same on the outside.
Also looks like this tune was setup for auto electronic transmission. would be better to start with a different bin for a 700R4
No need to re-invent the wheel. But we can make it better
the PCM was separate..on the transmission i can just put it as manual but the file you sent cant be edited seems password protected
The switch in the tune, is reported to do nothing, you have to segment swap.
there is a bin on this site for a non electric auto p01, in the 2088 OS.
I would say that would probably be the best match for you to get trans segments from.
I have a bin I swapped that already for an lm7 5.3
You would need a different XDF
Universal Patcher can read it though.
Be advised I have not used this bin file, but it should be fine, but use at your own risk.
I can post it up if you want.
Last edited by ralmo94; 04-09-2022 at 08:40 AM.
No need to re-invent the wheel. But we can make it better
ill take what I can get and try it.I'm still lost on how to put the file back in the pcm
how did you read your original bin from the PCM?
No need to re-invent the wheel. But we can make it better
with pcm hammer
That's what you use to write also.
There should be tutiols on YouTube
No need to re-invent the wheel. But we can make it better
thanks bro..i figured it out but now it says my unable to erase flash memory
Don't know if it helps or not, but see answer on pcmhacking site.
https://pcmhacking.net/forums/viewtopic.php?f=42&t=7112
No need to re-invent the wheel. But we can make it better
Reply With Quote
Bookmarks