After googling around for 7427 E fan control I found this:
http://www.fullsizechevy.com/forum/g...n-code-0d.html
When I try to copy the code into hex editor tool in TPRT it doesn't copy right? Does this have to be entered manually?
After googling around for 7427 E fan control I found this:
http://www.fullsizechevy.com/forum/g...n-code-0d.html
When I try to copy the code into hex editor tool in TPRT it doesn't copy right? Does this have to be entered manually?
The zip file from 93V8S10 with all info is here:
http://www.gearhead-efi.com/Fuel-Inj...ull=1#post3536
The conversation is here:
http://www.gearhead-efi.com/Fuel-Inj...D-efan-control
It is for $0D... I'm sure it could be implemented to $0E but not sure anyone has yet...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Thanks. How come when I try to copy the code at the bottom into the hex editor it pastes all wrong?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Have to enter it manually, copy and paste doesn't seem to work in hex editor.
It doesn't take long, I think it took me less than 5 minutes to complete all of the changes.
The man who says something is impossible, is usually interrupted by the man doing it.
with the new patch item in tunerpro, it can now be done almost automatically.
1995 Chevrolet Monte Carlo LS 3100 + 4T60E
Reply With Quote
Bookmarks