Have to enter it manually, copy and paste doesn't seem to work in hex editor.
It doesn't take long, I think it took me less than 5 minutes to complete all of the changes.
Have to enter it manually, copy and paste doesn't seem to work in hex editor.
It doesn't take long, I think it took me less than 5 minutes to complete all of the changes.
The man who says something is impossible, is usually interrupted by the man doing it.
I found a free hex editor on the net last night. I was able to copy and paste it just fine using that hex editor. Open the new bin in TunerPro and it appears as if the efan code was installed properly.
Robert, how do you use the patch feature in TP to apply this, just curious?
Here is the free hex editor I found if anyone else wants it!
When I go to patch in TP it wants to open up an 'Srecord', what do you do there?
Thanks Robert,
I'm going to try that method next time I boot into the Windoze side of my HDD and have access to TPRT.
Did anybody check out that hexeditor I found? Pretty neat I thought. I was easily able to open the bin, copy the Efan code into the appropriate addresses in the hex, and save a new binary!
Bookmarks